List of other building materials testing items and standards

Testing of other building materials needs to be carried out according to the specified items and methods in the standards, GB national standards, industry standards, external standards, enterprise standards, and local standards. The test report results of other building materials testing samples will be compared with the requirements in the standard, and the product quality parameters will be reflected in the report. BAIJIAN third-party testing agency can provide testing reports for other building materials. Engineers provide one-to-one service, select corresponding testing standards and projects according to needs, and arrange for laboratory samples to be sent for testing after formulating a testing plan. The testing cycle for other building materials is 3-15 working days, and can be expedited (except for special projects). Welcome to consult.

Testing report: other building materials testing

Baichan testing third-party agency covers a wide range of industries, including testing of textiles, cosmetics, insulation tools, hardware, food, agricultural products, etc., providing companies and enterprise products with Quality inspection services can be used for bidding, sales, supermarket entry, etc., providing testing support for scientific research by universities or enterprises, and helping to complete scientific research projects or new product development.

Other building material testing items:

Testing items:

Sintered tiles, building waterproof asphalt caulking paste, elastomer modified asphalt waterproof membrane, Construction slaked lime powder, plastic body modified asphalt waterproof membrane, cement packaging bags, gypsum board, construction slaked lime powder, roll weight, sulfur trioxide, solid content, water absorption, moisture content, state after heating, processing quality, Pulp production, water absorption, CaO+MgO content, soluble content, thickness, mass per unit area, water absorption vacuum method, dimensional change rate after heating, 28d compressive strength ratio, thickness, deformation, curvature, volatility, Zinc coating weight, frost, formaldehyde release limit in artificial panels and in them, density, underfire, delamination, determination of diagonal length difference, determination of surface density, appearance, undigested residue content, joint peel strength, Determination of unevenness, elongation under maximum load, water tightness of nail rod, fluidity ratio, determination of impact resistance, tensile yield strength, yield elongation, length, width, flatness, dimensional deviation, layout Printing content, color, mass per unit area of ​​cloth, drop weight impact test, bentonite durability, uniformity, workability, bentonite expansion index, workability, surface quality, chloride ions, heat treatment dimensional change rate, bending resistance, surface water absorption Quality, determination of hardness, texture, freeze-thaw resistance, adhesive peel strength, acetone resistance, tensile adhesion, heat resistance, impermeability, dimensional change rate, viscosity, bleeding rate ratio, areal density , tensile strength, fineness, impermeability, sulfides and sulfates, tensile properties, adhesion under shear, tensile load stress cracking, flexural strength, dimensional stability, free water, exudability, Puncture strength, nail resistance, stone quality, volume stability, compressive strength, appearance quality, mass per unit area, blue absorption capacity, resistance to rapid cooling and rapid heat, influence of bag making materials on cement content, right angle deviation Determination, breaking load, setting time, bulk density, low temperature bending property, determination of trapezoidal tear strength, right angle tear load, impact resistance, bulk density and void ratio, determination of edge hardness, alkali resistance, immersion resistanceTensile adhesion after water, fineness modulus, thermal aging, weight of impregnated material in dry base paper, moisture resistance, impermeability, surface quality of welded pipe, dry compressive strength, stability, determination of wedge edge width, zinc Coating uniformity

Testing standards for other building materials:

Testing standards:

1. GB18173.1-2012 Polymer waterproof materials Part 1: Sheet

2. GB/T1346-2001 Cement standard consistency water consumption, setting time, stability inspection method

3. GB/T19766-2005 Some natural marble building panels

4. GB12952-2003 Polyvinyl chloride waterproofing membrane

5. JC/T478-1992 Test method for building lime

6. JC/T1073-2008 Chloride ions in cement Chemical analysis method

7. JC507-2012 Construction terrazzo products

8. JC/T481-2013 Construction hydrated lime powder

9. GB/T9775-2008 Gypsum board

10. GB/T 18046-2008 Granulated blast furnace slag used in cement

11. QB/T2133-1995 Rigid polyvinyl chloride buckle for interior decoration Board

12. JC/T479-2013 Construction quicklime powder

13. GB/T328.10-2007 Test method for construction waterproofing membrane

14. GB18173 .1-2006 Polymer waterproof materials Part 1: Sheets

15. GB/T7141-2008 Plastic thermal aging test method

16. JC/T690-2008 Asphalt composite tires Flexible waterproof membrane

17, JC/T799-2007 Decorative gypsum board

18, JC709-1998 Sintered tile

19, JC/T 207-1996 Building waterproof asphalt caulking paste

20, GB 18242-2008 Elastomer modified asphalt waterproofing membrane

100 inspection service process

1. Sample Provide: The customer provides the samples to be tested and develops a testing plan;

2. Sample reception: After receiving the sample, the laboratory will verify and enter the sample information;

3. Sample processing: Perform necessary pre-processing on samples to ensure the accuracy of test results;

4. Detection analysis: Use appropriate physical, chemical or biological methods to test samples to ensure detection coverage and accuracy. ;

5. Result report: According to the testing plan, BAIJIAN will inform customers of the testing results in a concise and accurate manner and provide detailed information.Detailed test report.

What is the use of a test report?

The product test report mainly reflects whether the various indicators of the product meet the qualification requirements of the standard. It can provide information for enterprise product development, bidding, and e-commerce. The launch of the platform, the presence of supermarkets, and school scientific research provide objective reference.

This is the first introduction to product testing items, standards, report processing procedures, etc. If you have any other questions, please feel free to call us and we will serve you wholeheartedly.