List of metal parts testing items and standards

How to handle the metal parts inspection report? The results of the metal parts inspection sample test report will be compared with the requirements in the standard, and the product quality parameters will be reflected in the report. BAIJIAN third-party testing agency can provide metal parts testing report processing, engineers provide one-on-one service, select corresponding testing standards and projects according to needs, formulate testing plans, and arrange for laboratory samples to be sent for testing. The metal parts inspection cycle is 3-15 working days, and can be expedited (except for special projects). Welcome to consult.

Test report: Metal parts testing

Testing cycle: 3-15 working days for regular samples and projects, and can be expedited. Special samples and projects are excluded, such as efficacy testing, etc.

Sample delivery method: express delivery or door-to-door testing

Testing fee: determined based on the project and standards.

Service objects: enterprises, companies, units, individual merchants, universities, non-rights protection dispute testing

Metal parts testing items:

Testing items:

p>

Salt spray test, roundness, cylindricity, surface roughness, coating thickness, low temperature tensile test, element analysis, impact test, compression test, room temperature tensile test, Brinell hardness, microscopic morphology observation, Microstructure inspection, Rockwell hardness, fatigue test, Vickers hardness, creep test, high temperature tensile test, liquid penetrant testing, penetrant testing

Metal parts testing standards:

Testing standards:

1. GB/T 2039-2012 Uniaxial tensile creep test method for metallic materials

2. T/CAMAC 0005 - 2020 "Civil Aviation Non-destructive Testing Penetration Testing" 》

3. GB/T 228.1-2010 Tensile test of metallic materials Part 1: Room temperature test method GB/T 228.1-2010

4. GB/T 4340.1-2009 Metal Vickers hardness test of materials Part 1: Test method

5. GB/T 229-2020 Charpy pendulum impact test method for metallic materials GB/T 229-2020

6. GB/T 7314-2017 Room temperature compression test method for metallic materials GB/T 7314-2017

7, GB/T 13298-2015 Metal microstructure examination method

8, GB/ T 231.1-2018 Brinell hardness test of metallic materials Part 1: Test method

9. GB/T 4340.1-2009 Vickers hardness test of metallic materials Part 1: Test method GB/T 4340.1-2009< /p>

10. GB/T 1958-2017 Product Geometric Technical Specification GPS Geometric Tolerance Testing and Verification Table C.4

11. ASTM E1417/E1417M − 16 "Standard Procedure for Liquid Penetrant Testing"

12. GB/T 228.3-2019 Tensile Test of Metal Materials Part 3: Low Temperature Test Method

13. GB/T 228.1-2010 Tensile test of metallic materials Part 1: Room temperature test method

14. GB/T 3075-2021 Axial force control method for fatigue test of metallic materials GB/T 3075-2021

15. GB/T 231.1-2018 Brinell hardness test of metallic materials Part 1: Test method GB/T 231.1-2018

16. GB/T 228.2-2015 Tensile test of metallic materials Part 2 Part: High temperature test methods

17. GB/T 10125-2012 Artificial atmosphere corrosion test salt spray test

18. GB/T 16921-2005/ISO 3497:2000 Metal coating. Measurement of coating thickness. /ISO 3497:2000 Metal coating. Measurement of coating thickness. X-ray spectrometry GB/T 16921-2005/ISO 3497:2000

Inspection report processing process:

1. Communicate with customer service through the website contact information

2. After confirming the demand, recommend and formulate a plan, and then make a quotation

3. After confirming the plan and quotation, arrange for samples to be mailed to Designate a laboratory for testing

4. After the sample is sent to the laboratory, wait for the laboratory test results

5. After the laboratory test is completed, a corresponding report will be issued. If a paper report is required Then arrange mailing

If it needs to be expedited during the processing period, you need to communicate in time and arrange expedited service

Purpose of the test report:

Shopping malls, e-commerce Shelves, internal quality control, bidding, university scientific research, etc.

This is the first introduction to product testing items, standards, report processing procedures, etc. If you have any other questions, please feel free to call us and we will serve you wholeheartedly.