Third-party processing process for packaging product testing reports

Packaging product testing needs to be carried out according to the specified items and methods in the standards, GB national standards, industry standards, external standards, enterprise standards, and local standards. What are the testing items and standards for packaging products? BAIJIAN third-party testing agency provides one-stop service for packaging product testing, engineers provide one-on-one service, confirm needs, recommend solutions, send samples for inspection, issue reports, and after-sales service, 3-15 work Reports will be issued on the same day. Welcome to inquire. The packaging product testing cycle is 3-15 working days. It can be expedited (except for special projects). Welcome to inquire.

Test report: Packaging product testing

Testing fee: Negotiable by phone

Testing cycle: Normally 3-15 working days, except for special circumstances.

Reporting qualifications: CMA, CNAS, etc.

Report format: Chinese and English, paper version, electronic version.

Packaging product testing items:

Testing items:

Number of upper seam stitches, allowable deviation, standard quality, pressure test, sling elongation test, Periodic lifting test, vertical drop test, base fabric tensile strength and elongation test, base fabric tensile strength, base fabric cold resistance, base fabric heat resistance, basic requirements, stacking test, appearance and structure, appearance Quality, capacity, dimensional deviation, size and thickness, UV resistance, hem width, handle pull test, handle pull test, breaking strength, air tightness test, hydraulic test, leakage, paint film appearance, paint film adhesion , warp and weft density, structural dimensions, distance from suture to seam edge, needle density, quality of surface protective layer, specification, quality, maximum deviation of warp and weft density, drop test, tensile strength of connection, thickness, lifting beam and lifting ring Strength test, mark, recyclable mark, filler mark, potassium permanganate oxygen consumption, appearance soaking solution, lead and cadmium dissolution, appearance and sensory requirements, appearance appearance quality, sensory and appearance quality, printing pattern adhesion performance , Thickness and deviation, width and deviation, effective length of bag, effective width of bag, height limit deviation, verticality limit deviation, size deviation size, corrugated structure and its size, caliber error, height error, weight error, Bottle height, outer diameter of bottle body, outer diameter of bottle mouth, inner diameter of bottle mouth, vertical axis deviation, number of segments and length of each segment, net mass and deviation, mass deviation, quality, full mouth capacity deviation, capacity, liquid level line requirements, quantitative and quantitative deviation , Banner quantitative difference, distance from front line to seam edge, *performance after artificial accelerated aging, heat sealing strength, sealing peel force, right angle tear performance, right angle tear load, right angle tear strength, right angle tear force, peel test interlayer peel force, Peeling force, heat resistance, thermal stability, deformation measurement, drop performance, drop resistance, cold resistance, oil resistance, pressure resistance, sealing performance, capping performance, anti-theft performance, suspension test

Packaging Product testing standards:

Testing standards:

1. GB/T 3923.1-2013 Tensile properties of textile fabrics Part 1: Breaking strength and breaking elongation

2. HJ 209-2017Technical Requirements for Environmental Labeling Products Packaging Products

3. GB/T 20858-2007 "Test Method for Determination of Capacity of Glass Containers by Gravimetric Method"

4. GB/T 3534-2002 " Method for determination of lead and cadmium dissolution in daily ceramics》

5. GB/T 13252-2008 Packaging container steel pail GB/T 13252-2008

6. QB/T 2818 -2006 Polyolefin injection molded packaging drums QB/T 2818-2006

7. GB/T 325.2-2010 Packaging container steel drums Part 2: Minimum total capacity 208L, 210L and 216.5L fully open steel drums

8. GB 8569-2009 "Solid Chemical Fertilizer Packaging"

9. GB/T 18455-2010 Packaging Recycling Mark GB/T 18455-2010

10. GB/T 731-2008 Jute cloth and sacks

11. BB/T 0019-2013 Packaging containers square and flat cans 7.1

12. GB/T 451.1- 2002 "Determination of Dimensions and Deflection of Paper and Board"

13. GB/T 9286-1998 Cross-hatch test of paint and varnish films

14. QB/T 1130-1991 "Test Method for Right Angle Tear Properties of Plastics"

15. GB/T6672-2001 Mechanical Measurement Method for Determination of Thickness of Plastic Films and Sheets

16. GB/T 6544- 2008 "Corrugated Cardboard"

17. GB/T 13252-2008 Packaging Container Steel Bucket 8.1

18. GB 13735-1992 "Polyethylene Blown Agricultural Ground Covering Film" < /p>

19. YZ/T 0166-2018 Technical requirements for express mail packaging fillers YZ/T 0166-2018

20. GB/T 10454-2000 Container bag 5.3.5.3

BAIJIAN sample testing process:

1. Call 131-4818-0553 to consult BAIJIAN customer service to confirm samples and requirements.

2. Customer service arranges for engineers to connect and formulate testing plans according to needs.

3. Sign the contract after confirming the plan and quotation, and arrange to send samples for testing.

4. The laboratory conducts testing of samples according to needs.

5. After the test is completed, a sample test report is issued.

6. If urgent, please communicate with the engineer or customer service in advance.

What does a test report mean?What is it used for?

The product test report mainly reflects whether the various indicators of the product meet the qualification requirements of the standard. It can provide objective information for enterprise product research and development, bidding, e-commerce platform listing, supermarket entry, and school scientific research. refer to.

Baiqian testing features:

1. Wide coverage of the testing industry to meet different testing needs;

2. Full coverage of the laboratory, allocating localized testing nearby ;

3. One-to-one service by engineers to make testing more accurate

4. Free initial inspection, no testing fee will be charged for the initial inspection

5. Self-service Free door-to-door sampling by express delivery;

6. Short cycle, low cost, considerate service;

7. Laboratory CMA, CNAS, CAL qualifications;